
About us
Process Flow
-
Bamboo→material shearing→sheet-punching
Straight, round and large-diameter bamboo material, 5-6years bamboo (1.5m from the ground) with diameter of 10cm or above -
Planish the inside & outside of bamboo piece and plane part of bamboo green and bamboo yellow. -
→Steaming, bleaching/carbonization→drying
Lixiviate nutriment in bamboo and increase the whiteness and brightness of bamboo sheets; carbonization can deepen bamboo color and satisfy demands of clients. Dryness can prevent from drying shrinkage, cracking and deformation of flooring and prevent from worm and mildew; the liquid water content after drying is lower than 7%. -
→Finish plane→selection
Plane the dry bamboo green and bamboo yellow and guarantee the demand of fracture plane. Select unqualified bamboo sheet and grade bamboos with large color and luster difference. -
→Veneer wood press, lamination and compound
Make thermocompression bonding by double-directional pressurization of steam heating. -
→Edge-cutting→matcher→sanding
Straighten the pressing bamboo sheet; notch the edge-cut flooring to conform to shape. -
→Four-times primer, twice finish
Sand white belt of bamboo flooring and then make primary coat; rub down and clean it by sand belt after solidification and then solidify it again. Brightness or low sheen type can be selected for finish coat according to client’s demand. -
→Product inspection & packing
Examine or grade the finished products according to relevant standard.

ABOUT US
CONTACT US
Address:Wuyishan Tourism Economic Development Park, Fujian,P.R.China
Tel: 0599-5257399 0599-5257389
E-mail: info@513bamboo.com xzy@513bamboo.com
- Message
- Tel 0599-5257399
- Top
Copyright:WUYISHAN HONGYUAN NEW ENVIRONMENTAL MATERIAL CO.,LTD | Powered by www.300.cn | 闽ICP备07012357号